FreeM with MaxM

 
FreeM with MaxM

By removing the “pwrsel” jumper on MaxM and shorting all three “pwrsel” pins together with a scrap piece of wire, a MaxM can be made to power a FreeM. The MaxM must then be powered by an external power source via its 2.1mm barrel connector.

The FreeM then in turn controls the MaxM, making for an IR-remote controlled MaxM.

todbot.com/blog/2011/03/15/using-freem-with-blinkm-maxm/

 Posted by at 12:18 pm

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)